MarsMD Barbell Metal Detector Shaft

$ 120.00

List of metal detectors that are compatible with a barbell MarsMD:

  • GARRETT: ACE 150/200/250/300/350/400, АТ Pro, AT Gold;
  • FISHER: F2, F4, F5, Gold Bug, F11, F22, F44;
  • WHITE’S: Coinmaster, Coinmaster Pro, Prizm 3/4/5/6;
  • TEKNETICS: Eurotek, EurotekPro, Alpha 2000, Delta 4000, Gamma 6000, Omega 8500, Digitek;
    • Equipment:
    • 1.Shtanga assembly - 1 pc.
    • 2.Fiksiruyuschy strap - 1 piece.
    • 3.Bolt mount coil - 1 pc.
    • 4.Nabor rubber rings - 1 pc.
    • 5.Nabor screws and screws for mounting - 1 pc.
    • 6.Universalny adapter - 1 pc.

     

    Attention! Installation of some metal detectors (Garrett, White's) on MarsMD post involves entering into their design minor changes to be carried out according to the instructions. Such changes do not affect the operation of the device, but are irreversible.

    • GARRETT ACE 150/200/250/300/350/400:
    • 1.C cutting tools, shorten stem mounting control unit (Fig 1.) So that the resulting leg №1 height was 5 mm and the height of the legs №2 - 6 mm.
    • 2. Do a chamfer on the inside of the universal adapter (Fig. 2).
    • 3.Prikrepite control unit of the metal detector to the universal adapter with self-tapping screws DIN 7982, size: 2,9h13 mm (Figure 3.).
    • 4. Install the detector at MarsMD rod (Fig. 4).

     

    • WHITE'S COINMASTER / COINMASTER PRO:
    • 1.C cutting tools shorten the control unit mounting legs (Figure 5.) So that the resulting leg №1 height was 7 mm and the height of the legs №2 - 6 mm.
    • 2. Do a chamfer on the inside of the universal adapter (Fig. 6). 3.Prikrepite control unit of the metal detector to the universal adapter with self-tapping screws DIN 7982, size: 4,8h16mm PH2 (Figure 7.).
    • 4. Install the detector at MarsMD rod (Fig. 8).